April 22, 2019, 04:55:43 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - JohnnieHostile

Pages: [1]
General Discussion / Re: Holster...
« on: June 04, 2017, 06:21:41 AM »
I bought a holstet in e-bay, supposedly made for the r51. Leather (hard!!), it fit fine but I didn't like the non lined part if it. Then on first try of it (iwb appendix carry) I bent over to pick something up, magazine gets ejected, holster covered and engaged release.

Since then I have found my desantis colt new agent holster fits it better than my colt!! Hammer on my colt when cocked and locked passes the leather flap that is supposed to keep it from gouging you (it doesn't cocked).
The r51 fits it perfect and its lined.

R51 General Discussion / Re: Feeding Problems
« on: June 04, 2017, 06:06:14 AM »
I have had the nosediving in mag, especially with plus p ammo. I noticed the stuff I ordered (speer lawman 147 grain hp, and rattlesnake 124 ball, good deal online🙂) is slightly longer (1mm aprox) than 115 grn.
This was before shortening the followers on 2 mags, have one that is still stock.
Will find out Tuesday at range if follower shortening and rounding off, shortening follower stopis issue.

R51 General Discussion / Re: remington r51 grips
« on: June 04, 2017, 05:58:50 AM »
I got a set from ya on e-bay 3 months ago. They are nice😊

Introductions section / hello and apologies.
« on: April 17, 2017, 12:39:15 PM »
I posted in general first. My bad, didn't read the rules first ::).

General Discussion / Re: Hello and my experience/review so far.
« on: April 17, 2017, 12:34:26 PM »
     You can carry with 7 in the mag and one in the pipe.  Lock your slide open, insert loaded mag, pull on slide, and let it "Slingshot" closed.
Take out mag, add seventh cartridge, and you are good to go. Remington recommends this method in the owners manual for the R51.
        I carry mine as backup cocked and locked.  no problem.
As for the sights, for some reason, Remington set the sights for military Combat Center hold..
Check this thread.
As for the magazines, trimming the legs on the mag followers is what a bunch of have done, and it works. Trust us.


Actually my issue is it jams after firing chambered round on tactical reload. The top (first of seven cartridges) one in magazine ends up jammed, sticking straight up in ejection port.
I've noticed if you put full magazine in with slide closed and then remove it. the top cartridge will be pushed 4-5mm forward by the pederson block. I think it is lack of downward travel in magazine (to tight). So if a chambered round is fired the pushed forward (nose up) round in magazine gets snagged by fired round in ejection and flips it up jamming in slide.

Remington R51 Facts and Specs / Re: Desantis Sof-Tuk holster
« on: April 14, 2017, 12:54:39 PM »

What I purchased, in route.........

General Discussion / Re: Hello and my experience/review so far.
« on: April 14, 2017, 12:46:21 PM »
Have noticed I can stop slide at breakdown hole and it will rest if uncocked. Don't know if this is normal.

Mine will do that too. But I have never tried to remove the takedown pin in that configuration.

I haven't either, Remington video shows it cocked for  . I have found it easier to grip it open by barrel  and push take down pin out with a finger in ejection port. Haven't slipped and pinched finger yet either  :).

General Discussion / Re: Grip screw washers
« on: April 14, 2017, 12:20:59 PM »
Got me some hand made ones off E-bay, 32 bucks free shipping. Didn't lose grommets, haven't tried em at range yet.

General Discussion / Hello and my experience/review so far.
« on: April 14, 2017, 12:00:55 PM »
Howdy y'all.

I've been reading on here couple weeks ever since I purchased my gen2 R51.
I missed all the gen1 hoopla. I was checking Academy hot deals and come across the gen2. Loved the retro look and the idea of bringing back an old design and was intrigued by the claims of comfort and recoil, not to mention plus p in a compact. Purchased the next day.

Weekend at my folks out in the country got to try her out on some cans. Shot great but hard to aim, seemed to be low but kinda hard to know for sure at some cans with pool bank backstop. Noticed sights were off to the left a bit. tried to adjust but wouldn't budge even with set screw completely removed. Did not want to get to physical with punch on my brand new gun!! Didn't like idea of $125.00 new sights (read on this forum about others with down and to left and they did this.) for a new gun.
She jammed on me twice both with remington practice rounds out of first 100 rounds. No jams with Hornaday critical defense. Close to two hundred through her, decided a range environment would be better suited to finding out fact of an aiming issue or not.

Made the range next weekday off. Bullseyes at 6 yards for first fifty then started moving left? found my sights (rear) was working itself over to left. 350 rounds total. Got a couple of no chambering when racking slide and two more jams when real dirty (this happened when attempting tactical reload, chambering one then dropping mag and adding another one and replacing mag; 7 + 1). Was not fun cleaning afterwords, gun and mags!! Used several brands and weights, Blazer, Hornaday, aguilla, remington. Could tell no difference in felt recoil from 115 grain to 147. Plus P ammo ordered for next time but didn't get to this time.

I got sights centered and gun dead on at defense range. Most comfortable shooting gun I own and trigger pull phenomenal compared to my LC9 (only peeve about my LC9, the long long trigger pull). Easier to keep on target with follow up compared to my LC9. Little heavier but I like the fact it aint polymer framed. Lighter than my Colt New Agent! I don't like the fact I can't add a seventh after chambering one and leary of no slide safety for carrying chambered. I have seen videos of racking on your belt or boot heel but seems a good way to accidently shoot yourself in emergency, stressful situation.

I have had no issues with slide stiffness. Have noticed I can stop slide at breakdown hole and it will rest if uncocked. Don't know if this is normal. Can find nowhere in manuel or Remington sight of seven plus one claim and don't want to shorten legs in magazine (I'm confident that no downward travel in full mag is what jams it on a tactical reload after first shot).

I love this gun but aint comfortable/trusting enough yet for CC.

I have been reading on here. I purchased a barrel on E-bay myself (fits fine, aint shot with it yet) and found some wood grips, custom made there for 32 bucks.
Holster for 35 off Ebay aint in yet but I aint carrying until I get more comfortable/training in with her.

Thanks for adding me and reading fellas.
Arlington, Tx. by the way.

Pages: [1]