• Welcome to Remington R-51 Pistol Forum. Please log in or sign up.
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - tdbru

#1
if anyone has installed the trijicon sight set, did you observe a POI shift with the new sights?  if so, which way?
thanks,
Brian
#2
R51 General Discussion / my R51, so far...
May 12, 2018, 10:41:26 PM
picked up an R51 a couple of weeks ago.  Huntsville S/N.  read owners manual.  disassembled.  cleaned.  lubed parts.  reassembled.  yes, reassembly was difficult the first time.  i've done it 3x now and it's much easier.

took to range.  loaded mag.  chambered round.  no bang.  tried several times.  no firing pin marks on primers at all on any of the rounds in the magazine.  go home.  field strip pistol.  firing pin is really hard to move in breech block with fingers.  take pliers in leatherman wave and grip tail of firing pin.  push back and forth in breech block with a lot of effort.  i am thinking some manufacturing debris maybe didn't get removed??  drive firing pin retaining cross pin out of breech block and use pliers to take firing pin out.  examine firing pin.  the cylindrical section of the firing pin has a slot milled in it for the cross pin to retain firing pin in breech block.  at rear of the milled slot there was a raised hump of metal that stuck up.  the top had the finish rubbed off of it.  evidently this firing pin wasn't caught by any kind of QC.  took out the file on the leatherman wave and filed the hump down to match the cylinder body.  reinstalled the firing pin.  reassembled the pistol.  ran like a champ after that.  no FTF, FTE, FTF, etc.  tried over 300 rounds of 115gr. fmj RN and FP, 124gr. RN NATO, 124gr. RN standard, 124gr. HP - 2 kinds - both +P, 147gr. fp - 2 brands.  125 Hornady HAP reloads.  everything worked.  both magazines.  2 hand hold at 7 yards kept magazine full in a 2" circle.  mine is "combat" sighted, not bullseye sighted.  so i had to cover the target to keep rounds in the bullseye.  not conducive to tight groups for me.  tomorrow i'll try over sandbags if i get the chance.  emailed Remington and asked for a new firing pin as this one had the protective finish removed where the hump got ground down (parkerizing??) and i wanted a good firing pin to put back in that didn't have any finish removed.  just got it in the mail today and installed it.  while i was doing that i examined the pistol for wear.  saw very little.  the ramps in the breech bolt body that the slide engages to lift the bolt out of lock showed some burnishing.  to be expected in my mind.  also the frame ledge where the bolt locks up at firing showed some anodizing wear, but no dimensional changes that i could tell.  the first time i disassembled the R51 when i got it i noted that the barrel feed ramp came polished from the factory and that wasn't something i'd need to do on this one.  all interior surfaces of the slide were nicely machined and finished.  no burrs found.  barrel interior finish was very good, in my opinion.  no other issues.  just the firing pin issue.  fit and finish are very nice in my opinion.  accuracy is good but the short sight radius makes it a bit tougher as compared to a pistol with a longer sight radius.  trigger feel is acceptable in my opinion, not great, but better than some i've tried.  reset isn't very noticeable to me unless i really concentrate on it.  not an issue for my use however. not too keen about the plastic trigger, but, don't even notice it in use and so as long as it doesn't fail in any way, it's a don't care functionally. aesthetically i think it would be nicer, to me, being anodized aluminum with no side to side wobble, but who knows, that might wear faster than what is in there now.  but it would look nicer in my opinion.  recoil is easily tolerable, barrel flip seems minimal.  feel in hand is good.  weight is nice for carry.  quite a bit lighter than any full size service auto.  grip safety on my instance clicked on and off audibly as well as being very tactile.   i like the fact that there are no other safeties other than the grip safety.  grip angle is quite comfortable for me.  i have larger hands so this fits me so much better than a SIG 938 i tried.  the grip length on the R51 is good for my size of hand.  trigger reach was no problem.  magazine release is difficult without changing grip as the recessed magazine release buttons, at least on my instance, take a deliberate strong vertical actuation which i cannot accomplish with either a thumb or finger without changing grip entirely.  maybe that will loosen up with use?  both magazines drop free, though, when i finally am able to fully depress the magazine release button.    i did have a nose dive in the magazine when i failed to get it fully seated into the magazine well and the magazine dropped slightly.  that was operator error.  both magazines by the way have the gen2 hump  at the front of the follower.  once i fully seated the magazine until it clicked the magazine latch, then there were no more nosedive issues.  other than the firing pin issue, which Remington did a great job of sending a replacement part right away, i've had no issues with this copy of the R51 gen 2.  a friend picked up 2 of them and has had no issue with either of them, other than difficulty in field stripping and reassembly.  i like this one enough i might have to pick up another one.  i am looking forward to shooting over a sandbag rest and see just what size groups it can deliver with me driving.  myself particularly i don't care for the "combat" sight picture this R51 seems to be setup for.  i prefer more of a bulleye setup where the bullet impact is at the top of or just over the front sight.  personal preference i guess.  i noted that the 115s grouped a bit higher than the 124s which grouped higher than the 147s for the same sight picture.  in fact i had to really cover the target a lot to get the 147s to shoot to the center of the bullseye.  standard 124s and +P 124s didn't seem to have much difference in recoil to me.  both i could hold in the 2" target center at 7 yards offhand for a full magazine each.  i am still getting use to the trigger and short sight radius.  and i am not a great shot with a pistol anyway.  but i am pleased with this one.  i picked up a galco stinger holster for it and the R51 fits in that holster well and the whole rig carries comfortably.  i rarely noticed it was along for the ride.  i'll be taking it with when out hiking, hunting, camping, etc.   i like target shooting anyway, but i am finding this R51 is a hoot to plink with.  i am glad i got it.  i have decided that due to the effort to field strip and reassemble, i will simply use a q-tip to swab out the carbon accumulation from the pistol with the slide open, and then run a boresnake through the barrel a couple of times and call it good for the most part.  maybe field strip and clean once a year?  i really like the low bore axis too.  the low bore axis is really noticeable when compared to full size browning type tilt barrel actuating service pistols.  and though looks are good or bad based upon individual preferences, i really like the looks of the R51 too.  since i quickly decided this one is a keeper i ordered a few more magazines to go with it.  my only change that i am going to make is to go to tritium night sight set.  i just can't decide on which ones yet, though i'm leaning towards trijicon personally.   i am looking at the manufactures sight heights to see if i can find a set with a bit more height difference between the front and back, so that it shoots more towards a bullseye sight picture rather than a combat sight picture, though that is simply a personal preference by me.  compared to a full size service pistol, this one carries much more nicely.  it'll be the one i have with when i'm not specifically headed to the range for some target shooting, though it will go with to that too.  the full size service auto is fun to shoot, but they are big enough and heavy enough that i usually won't strap it on when out hiking, camping, hunting, etc. due to the extra weight primarily, and bulk too.  this R51 will be going along now.   as i mentioned i hope to get to the range tomorrow to test the groups over sandbags, and try to get some chronographing done as well.  This is my 2 week report.  Looking forward to putting many more rounds downrange with this R51.
regards,
tdbru
#3
Introductions section / hello..
May 12, 2018, 10:40:12 PM
picked up an R51 2 weeks ago.  really like it.  been hunting and target shooting many many years.  have done handgun hunting.  lots of plinking.  tried metallic silhouette with a 357 once.  prefer S&W revolvers, but this little R51 is growing on me.  i'll post more details of the R51 in the discussion forum.
tdbru