Text only | Text with Images

Remington R-51 Pistol Forum

General Category => General Discussion => Topic started by: Seamus55 on April 20, 2020, 04:52:37 PM

Title: Redneck disassembly tool
Post by: Seamus55 on April 20, 2020, 04:52:37 PM
For years my wife has been telling me that I have lost my grip. The first time I tried to disassemble my new R51 I had to agree. . 

I found a box of Adel Clamps left over from a aircraft project.  1/2 inch was a perfect fit. a bolt and wingnut and it was ready to test.  The rubber liner holds the clamp tightly in place without scratching the barrel. I soldered the bolt in place so that I wouldn't lose it.

Sorry no pix. The files are too big.
Title: Re: Redneck disassembly tool
Post by: sebvox on April 20, 2020, 05:20:12 PM
Resize those files, we need to see some pics!
Title: Re: Redneck disassembly tool
Post by: Seamus55 on April 20, 2020, 05:56:18 PM
 I'll try again
Title: Re: Redneck disassembly tool
Post by: Seamus55 on April 20, 2020, 05:58:57 PM
one more
Title: Re: Redneck disassembly tool
Post by: sebvox on April 20, 2020, 06:46:32 PM
I agree... that's pretty redneck, but if it helps you, that's all that matters.  Did you just do a field strip or break it down further?
Title: Re: Redneck disassembly tool
Post by: Seamus55 on April 20, 2020, 08:36:16 PM
just field strip so far.
Title: Re: Redneck disassembly tool
Post by: sebvox on April 22, 2020, 05:03:18 PM
I have seen a video where a guy was using a little mini 3/4" anvil clamp.  47₵ at Home Depot.
Title: Re: Redneck disassembly tool
Post by: FlatEarther on April 22, 2020, 07:13:57 PM
I have used the spring clamp and it works good.
I also like the adel clamp idea  ;)
Text only | Text with Images