Make sure you call Remington to get a ticket started......

      johnnysr51

how many locations does Remington have , I hear N.carolina, and Alabama, any other states for guns or parts
just checking

       johnysr51

iam all in ordering 2 or 3 tomorrow then atemp to take one apart ,, thanks R51 owners

      johnnysr51

looks like iam going to buy a couple magazines befor I go north , so while iam gone I will try the mod on one and see how it works when I get baqck

     johnnysr51 THanks Guys for infpo

if you look at the pics on the R51 that posted the barrel with a case still in the chamber ,,, Did anybody take notice to the machining of the lower part were the slide pin release goes in the machining is different then mine , what about any body eles is it different I can post a pic if needed,,,, let me know

                                                                          JohnnsR51

   Chris,,
home depot has a metal clamp with molded rubber on the ends to grab the barrel, the barrel needs to be out 3/4in
for the pin to come out then just pull the clamp and the slide comes right out ,
               GOOD luck with new R51

                                                           JohnnysR51

yes u r seeing what iam seeing, its like the block but 2 impressions there ,were the bottom of the block slams shut I cant see it going any more as the barrel is putting the brakes on it ,, iam going to keep my eye on it ... thank for looking
                                                                            Johnny

 I need a little help on this I have put 869 round threw my R51 shooting for a 1000 befor April 5th ,(I go to a state for 5 months that the law is pretty shaky), I was wondering about the ware on my frame,
        I bought the gun and then spent a week or so taking it apart and reassembling it to get use to cleaning it , I got
it down pretty good I think, and when I take it apart after range time clean spotless then apply gun grease to the runner that holds the slide (once I apply the grease I take a hair dryer and heat the grease so it flows in the track, oil the parts that needs oil) I rack the gun a lot at night and it is getting smoother. I will post a pic ,,, and would like to what you think .

R51fan2017 ,,,,
when I bought it ,, I had the gun store clean it befor I took it home then when I got home
I did my home work to disasemble and reassemble and re clean it, and clean it after every range day , and it is showing ware it is showing aluminum I was thinking of sending Remington a pic I have of it
         ,
        johnny

Blackie ,,
   was she with the WWE .
        Johnny

back from the range today , she sure get's dirty, I have a hard time holding the slide open with my hands , my right & left  hands has Arthritis in both wrist , so I use a Clamp to help do the job , with out the clamp it takes mabe 15min to dissemble and longer to assemble ,,, with the clamp its 5mins to do both

Hello R51 owners , went to the range again today {had to go to the indoor range ,to windy for the outdoor) put 220  rounds threw her (50 blazer brass, 100 rounds magtech, 50 rounds Winchester, all 115gr FMJ, & 20rounds Remington U/D 124gr. 9mm Luger+P Golden Saber BJHP , that brings the total to 869 rounds so far, the 100 round mark is coming , will have to waite till next week for that, Looking forward to the 1000 rounds, will update once the R51 goes to the range again,,
       
                                                                  "JohnnysR51"

EngineerPower,,,,, Count me in  ,,, I'll take one R51 Barrel ,,, by the way in the pics of the 2 barrels posted with the red circles wich barrel is from the R51 the one on the top or the one on the bottom thank you JohnnysR51

on the topic :   barrel Thread pitch,,,,,,,in the picks of the 2 r51 barrels with the circlers ,,
is the top barrel  from the r51
and is the bottom barrel from ebay thanks Johnny

by barrel looks just like the top one I may be reading it wrong

 R51fan2017           
just letting you all know I purchased mine 02/05/2018 0035XXXR51 ,
and on the box it saids not for sale until Aug 2016,, so does that mean, she has bin sitting on the
shelf for 18 months befor I purchased it,,,
              Johnny'sR51