• Welcome to Remington R-51 Pistol Forum. Please log in or sign up.

twist rate?

Started by JDCRAB, December 02, 2017, 07:30:41 AM

Previous topic - Next topic

JDCRAB

Does anyone here know the twist rate in the R 51 9MM Pistol?
Fealty to the 2nd amendment forever.

Chokejug

Seen it, but don't remember for sure.

Seemed surprisingly slow, somewhere like 12 or 16 I think.

JDCRAB

I wondered because I had some ammo [tulammo] that was tumbling at the 25 yd. target.  And I also found some oval holes in the tgt.

I'm thinking that this might be the reason for the sub-par accuracy. 8)
Fealty to the 2nd amendment forever.

1911SHOOTER

Quote from: JDCRAB on December 06, 2017, 11:24:51 AM
I wondered because I had some ammo [tulammo] that was tumbling at the 25 yd. target.  And I also found some oval holes in the tgt.

I'm thinking that this might be the reason for the sub-par accuracy. 8)


JD,
Just got an email from Big Green,  It is 1 in 10 inches.
Blackie
So many guns, so little time!

mr220v

I find r51's to be very accurate.  I do better with these than I do with my full sized cz75.  I know what you mean about the keyholing wolf ammo, but even then I was getting pretty tight groups.  Say the size of my fist at 10 yards.

The trigger is the biggest obstacle.  When I dry fire, i find it more difficult to keep the front site from moving around.  Where I put the trigger on my finger seems to make a big difference.

Rog54

Yes, MR,
I dry fire a lot.  And find the same as you.  It seems it is that "bump" as some call it, at the end just after the sear releases. I too find trigger finger placement to help.  I also found a firmer left hand stabilizing grip seemed to help.  But I still can't say I can do it consistently.
Rog
Rog